Are you planning your next adventure with an RV rental? Understanding how to use your RV control panel can enhance your experience, ensuring a smooth and enjoyable journey. Our comprehensive guide will walk you through the essential functions of your RV's control panel, helping you manage your resources efficiently and focus on creating unforgettable memories.
Why Understanding Your RV Control Panel is CrucialThe RV control panel is the heart of your motorhome, allowing you to monitor and control various systems. From checking propane levels to managing water tanks, this guide will help you master your RV control panel, making your trip hassle-free.
Getting Started: The Basics of Your RV Control Panel1. Checking Your LevelsLPG (Propane): Propane is essential for running your stove, oven, water heater, house heater, and refrigerator while driving. To check your propane levels:

• Locate the LPG button on your control panel.
• Press the button to display the current propane level.
• Ensure you have sufficient propane before starting your journey.

House Battery: The house battery powers most of the RV's internal systems, excluding the AC unit, microwave, 110 outlets, and televisions. These items require the generator or shore power.

• Press the "BAT" button to check the battery level.
• Ensure the battery is fully charged before departure.

Fresh Water Tank: This tank holds potable water for your trip.

• Press the "FRESH" button to check the water level.
• Fill the tank to ensure you have enough water for your needs.

Black and Gray Tanks: These tanks hold wastewater from the toilet (black tank) and sinks/shower (gray tank).

• Press the "BLACK" and "GRAY" buttons to monitor the levels.
• Empty the tanks as needed to maintain hygiene and functionality.

2. Operating the GeneratorThe generator provides power for the AC unit, microwave, 110 outlets, and televisions when you're not connected to shore power.

• To start the generator:
  • Press and hold the "STOP" button until the red light illuminates.
  • Press and hold the "START" button until the generator runs smoothly.
• Remember, the generator uses the same fuel as the engine and will automatically shut off at a quarter tank to prevent you from getting stranded.

3. Managing the Water Pump and Water HeatersWater Pump: The water pump enables you to access water from the fresh water tank for sinks, showers, and toilets.

• Turn on the water pump to use water.
• Turn off the pump when not in use to avoid motor burnout.

Water Heaters: Our RVs come with both propane and electric water heaters.

• Use the propane water heater at any time, powered by the house battery or shore power.
• Use the electric water heater when connected to the generator or shore power.
• Turn on the water heater 25-30 minutes before you need hot water.

Benefits of Mastering Your RV Control PanelUnderstanding and efficiently using your RV control panel can significantly enhance your travel experience. Here’s why:
Enhanced Comfort and ConvenienceKnowing how to manage your RV’s resources ensures you have everything you need for a comfortable trip. From hot showers to reliable power, mastering the control panel makes a significant difference.
Cost-EfficiencyEfficiently managing propane, battery, and water resources can help you avoid unnecessary expenses and make your trip more budget-friendly.
Peace of MindRegularly checking levels and understanding how to operate your RV systems can prevent unexpected issues, allowing you to enjoy a worry-free adventure.
Ready to Hit the Road?Our RV rentals are designed to provide you with an easy and enjoyable travel experience. With this guide, you’ll be well-prepared to use your RV control panel effectively, ensuring a smooth journey. Book your RV rental today and start creating unforgettable memories with the freedom and flexibility that only an RV can offer.
By following these tips, you’ll optimize your use of the RV control panel, making your travels more efficient and enjoyable. Ready to embark on your next adventure? Contact us today to book your RV rental and hit the road with confidence!

Are you preparing for your next adventure with an RV rental? Understanding how to use your RV refrigerator properly is essential for keeping your food and beverages cool throughout your trip. This comprehensive guide will walk you through the steps to ensure your RV refrigerator operates efficiently, making your journey more enjoyable and worry-free.
​

Why Proper Refrigerator Use is Important in an RVAn RV refrigerator is a vital component of your mobile home, allowing you to store perishables and enjoy fresh food on the road. Proper usage and maintenance can prevent malfunctions and ensure a consistent cooling performance. Here's how you can optimize the use of your RV refrigerator.
Getting Started: Key Points to Remember1. Ensure Your RV is LevelFor your RV refrigerator to function correctly, your RV must be level. If your RV is on a steep slope or unlevel ground, the refrigerator may struggle to ignite the flame needed for cooling. Always park on level ground to maintain optimal refrigerator performance.
2. Operating the RefrigeratorTurning On the Refrigerator

• Open the freezer compartment to access the control panel.
• Locate the switch and turn it on. The refrigerator will automatically enter auto mode.

Auto Mode Functionality

• On House Battery: The refrigerator runs on propane.
• On External Power or Generator: The refrigerator switches to electric power automatically.
• This automatic transfer ensures that you don't need to manually adjust settings throughout your trip.

Turning Off the Refrigerator

• To turn off the refrigerator, push the switch back to its original position, ensuring it snaps in securely.

3. Checking Power ConnectionTo verify that your RV is connected to a power source:

• Microwave Check: When you connect to an external power source or start the generator, check if the microwave is functioning. If it is, you have full power.
• Breaker Check: If the microwave isn’t working, check the breaker at your power source or the breaker box under the bed in your RV.
  • Open the breaker box and flip the breakers on and off to reset them.

4. Resetting OutletsIf an outlet in your RV is not working, you may need to reset it:

• Locate the reset button on the outlet.
• Press the button until it clicks to reset the outlet.

Benefits of Proper RV Refrigerator UsageEnhanced Food Safety and EnjoymentA well-functioning refrigerator ensures your food stays fresh, allowing you to enjoy delicious meals throughout your journey.
Convenience and ComfortBy understanding how to operate and troubleshoot your RV refrigerator, you can prevent inconveniences and focus on enjoying your trip.
Peace of MindKnowing how to maintain your RV refrigerator reduces the risk of malfunctions, giving you peace of mind and more time to create lasting memories with your loved ones.
Ready for Your Next Adventure?Our RV rentals come equipped with easy-to-use refrigerators and comprehensive support to ensure your trip is seamless and enjoyable. By following this guide, you'll be well-prepared to keep your food fresh and your RV running smoothly. Book your RV rental today and embark on a journey filled with comfort, convenience, and unforgettable experiences.
With these tips, you'll optimize your RV refrigerator usage, making your travels more efficient and enjoyable. Ready to hit the road? Contact us today to book your RV rental and enjoy a hassle-free adventure!

Selling an RV can be a challenging task, especially if you don't have a lot of experience in the market. One option that can make the process easier is to sell your RV as a consignment through a reputable dealer like Dufourfun RV. Here are five reasons why consigning your RV with Dufourfun RV is a great choicee:

1. Expertise: Dufourfun RV has a team of experienced professionals who know the RV market inside and out. They can help you determine the best price for your RV based on its make, model, age, and condition, and they can provide valuable insights & advice on how to prepare your RV for sale.
   
2. Convenience: When you consign your RV with Dufourfun RV, you don't have to worry about the hassles of advertising, showing, and negotiating with potential buyers. The team at Dufourfun RV will handle all of these tasks for you, freeing you up to focus on other things.
   
3. Exposure: Dufourfun RV has a wide reach and can expose your RV to a large group of potential buyers. They have a robust online presence, as well as a physical dealership where they can showcase your RV to interested buyers.
   
4. Flexibility: Consigning your RV with Dufourfun RV gives you the flexibility to sell your RV on your own timeline. You can choose to leave your RV with them for as long as it takes to find a buyer, or you can take it back at any time.
   
5. Trustworthiness: Dufourfun RV is a trusted and reputable dealer that has been in business for many years. They have a proven track record of helping their customers sell their RVs for a fair price, and they have an excellent reputation in the industry.

If you are considering selling your RV, consigning it with Dufourfun RV is a great choice. Not only will you benefit from their expertise and convenience, but you will also have the peace of mind that comes from working with a trusted and reputable dealer. To consign your RV with Dufourfun RV, simply contact them and discuss your options. They will be happy to help you through the process and answer any questions you may have. So, consigning your RV with Dufourfun RV is a smart and easy way to sell your RV and get the most value for your investmentt.
​
Here is a checklist of steps to follow to prepare your RV for sale:

1. Clean the RV: A clean RV is more appealing to potential buyers and can help you fetch a higher price. Be sure to thoroughly clean the interior and exterior of the RV, including the windows, upholstery, appliances, and storage areas.
2. Make minor repairs: Fix any minor issues or cosmetic damage that may be present on your RV. This could include things like replacing burned out light bulbs, repairing small tears in the upholstery, or fixing a broken cabinet door.
3. Check and replace fluid levels: Make sure all fluid levels (e.g., oil, antifreeze, transmission fluid) are at the proper levels and consider replacing them if they are old or contaminated.
4. Test all systems: Check that all systems (e.g., electrical, plumbing, heating/cooling) are in good working order and make any necessary repairs.
5. Gather documentation: Collect any documentation you have for the RV, such as service records, owner's manuals, and warranty information. This can help show potential buyers that you have taken good care of the RV and can give them peace of mind.
6. Price the RV competitively: Determine a fair price for your RV based on its make, model, age, and condition, and consider the prices of similar RVs for sale in your area.
7. Stage the RV: Consider staging the RV to make it more appealing to potential buyers. This could include things like adding decorative touches, removing clutter, and highlighting the RV's features and amenities.

By following these steps and preparing your RV for sale, you can increase its appeal to potential buyers and maximize its value. 

Call or text us at: 205.560.0408
​

In this article, we will discuss some common problems that can arise with RV air conditioners and provide solutions for each issue.


One of many problems that you may encounter with your RV air conditioner is that it is not turning on. This could be due to a variety of factors. First, check to make sure that the unit is receiving power. This may seem obvious, but it is worth doublee checking. Make sure the power cord is plugged in and the circuit breaker is not tripped. If the unit is not receiving power, this could be the cause of the issue.  If the unit is receiving power, the next step is to check the thermostat settings. Make sure the unit is set to "cool" and the temperature is set lower than the current room temperature. If the thermostat is not set correctly, the air conditioner will not turn one.


Another potential problem with an RV air conditioner is that it is not cooling effectively. This could be caused by a dirty air filter, which can restrict the flow of air through the unit. To fix this problem, simply clean or replace the air filter.
In addition to a dirty air filter, another factor that can affect the cooling performance of an RV air conditioner is the condition of the cooling fins on the outside unit. If these fins are dirty or obstructed by debris, it can reduce the unit's ability to dissipate heat. To fix this problem, simply cleaning the cooling fins.
Another potential cause of poor cooling performance is low refrigerant levels. If the refrigerant level in your RV's air conditioning system is low, it can cause the unit to struggle to cool effectively. To fix this problem, youu will need to have a professional add more refrigerant to the system.

Another issue that you may encounter with your RV air conditioner is strange noises. This could be caused by a dirty air filter, as well as cooling fins that are rubbing against debris. To fix these problems, clean or replace the air filter and remove any debris from the cooling fins.
In addition to these issues, you may also experience a leak from your RV air conditioner. This could be caused by a clogged or frozen drainage hose, or it could be due to the slope of the RV causing water to pool near the air conditioner. To fix this problem, clear any blockages from the drainage hose and make sure the RV is levell.
Troubleshooting an RV air conditioner can be a daunting task, but by following these simple steps, you can identify and fix many common problems.

To help you remember these troubleshooting steps, here is a checklist to follow when you are trying to fix your RV air conditioner:

• Check to make sure the unit is receiving power.
• Check the thermostat settings to make sure the unit is set to "cool" and the temperature is set lower than the current room temperature.
• Check the air filter and clean or replace it if it is dirty.
• Check the cooling fins on the outside unit to make sure they are clean and not obstructed by debris.
• Check the refrigerant level
• Check the mounting bolts to make sure they are tight.
• Check the drainage hose to make sure it is not clogged or frozen.
• Make sure the slope of the RV is not causing water to pool near the air conditioner.
• If the problem persists, consider having a professional service the unit.

I hope this checklist helps you troubleshoot any issues you may be experiencing with your RV air conditioner. If you follow these steps and are still having problems, it may be necessary to have a professional service the unit.

(fill out this quick form and a RV tech will reach out to help)

RV slide outs are a convenient feature that allows you to expand the living space of your recreational vehicle. However, like any mechanical device, slide outs can sometimes stop working or malfunction. If your RV's slide out is not working properly, there are a few steps you can take to try and diagnose and fix the problem.


Step 1: Inspect the slide out for damage or wear/tear
The first thing you should do when your RV's slide out is not working properly is to visually inspect the unit for any obvious signs of damage or wear. Look for cracks, dents, or other damage to the structure of the slide out, as well as any damage to the seal or gasket. You should also check the track to make sure that it is aligned properly and that there are no obstructions preventing the slide out from moving smoothly.


Step 2: Lubricate the moving parts on slide
If the track appears to be in good condition, you can try lubricating the moving parts of the slide out to seee if that fixes the problem. You can use a silicone-based lubricant or a product specifically designed for use on RV slide outs. Be sure to follow the manufacturer's instructions for applying the lubricant, and make sure that you lubricate all of the moving parts, including the track, the seal, and any other components that may be prone to friction.


Step 3: Check the motor or pump on slide
If the slide out still does not work properly after lubrication, you may need to check the motor or pump to see if it is functioning properly. The motor or pump is responsible for driving the slide out in and out, so if it iss not working correctly, the slide out will not operate properly. To test the motor or pump, you will need to locate the access panel on the slide out and follow the manufacturer's instructions for testing the unit. If the motor or pump is not functioning properly, it may need to be replaced.


Step 4: Bring in a professional if needed
If you are unable to diagnose and fix the problem yourself, you may need to bring your RV to a professional mechanic or RV repair shop for assistance. They will be able to diagnose the problem and make any necessary repairs to get your slide out working properly.

RV batteries are an essential component of any recreational vehicle, providing power for lights, appliances, and other electrical systems. However, like any battery, RV batteries can sometimes fail or malfunction. If your RV's batteries are dead and not working, there are a few steps you can take to try and diagnose and fixx the problem.


Step 1: Check the battery charger
The first thing you should do when your RV's batteries are not working is to check the battery charger. The battery charger is responsible for keeping the batteries charged, so if it is not functioning properly, the batteries may not be getting the charge they need. Make sure that the battery charger is plugged in and turned on, and that the charging light is on. If the battery charger appears to be working properly, proceed to the next stepp.


Step 2: Check the charging system
If the battery charger is not the issue, the next thing you should check...... (Click Read More)

Step 1: Check the circuit breaker
The first thing you should do when your RV's heater is not turning on is to check the circuit breaker. The heater is typically connected to a dedicated circuit breakers, which can trip if there is an overload and/or short circuit. If the circuit breaker has tripped, simply reset it and see if the heater starts working again. If the circuit breaker continues to trip, there may be an issue with the heater itself that needs to be addressed.


Step 2: Check the power sources
If the circuit breaker is not the issue, the next thing you should check is the power source. If the RV is not connected to a power source (e.g., generator, shore power), the heater will not be able to turn on. Make sure that the power source is on and functioning properly, and that the RV is properly connected to it.


Step 3: Reset the thermostat
If the circuit breaker is not the issue and the power source is working, you can try resetting the thermostat to see if that fixes the problem. Depending on the make and model of your thermostat, there may be a reset button or you may need to follow a specific sequence of button pressess to reset it. Consult the owner's manual for instructions on how to reset the thermostat.


Step 4: Check the heating element
If the heater still does not turn on after resetting the thermostat, the next thing you should check is the heating element. The heating element is responsible for generating heat, and if it is not functioning properly, the heater will not work. To check the heating element, you will need a multimeter. With the heater turned off, set the multimeter to the ohms setting and touch the leads to the heating element terminals. The reading should be within the range specified in the owner's manual. If the reading is not within this range, it could mean that the heating element is faulty and will need to be replaced.


Step 5: Bring in a professional
If you are unable to diagnose and fix the problem yourself, you may need to bring your RV to a professional mechanic or RV repair shop for assistance. They will be able to diagnose the problem and make any necessary repairs to get your heater working again.


Checklist for troubleshooting an RV heater:

• Check the circuit breaker
• Check the power source
• Reset the thermostat
• Check the heating element with a multimeter
• Bring in a professional if necessary

RV air conditioners are a crucial component of any recreational vehicle, providing much-needed relief from hot summer temperatures. However, like any mechanical device, air conditioners can sometimes stop working or malfunction. If your RV's air conditioner is not turning one, there are a few steps you can take to try and diagnose and fix the problem.


Step 1: Check the circuit breaker
The first thing you should do when your RV's air conditioner is not turning on is to check the circuit breaker. The air conditioner is typically connected to a dedicated circuit breaker, which can trip if there is an overload or short circuit. If the circuit breaker has tripped, simply reset it and see if the air conditioner starts working again. If the circuit breaker continues to trip, there may be an issue with the air conditioner itself that needs to be addressed.


Step 2: Check the power source
If the circuit breaker is not the issue, the next thing you should check is the power source. If the RV is not connected to a power source (generator, shore power), the air conditioner will not be able to turn on. Make sure that the power source is on and functioning properly, and that the RV is properly connected to it.


Step 3: Reset the thermostat
If the circuit breaker is not the issue and the power source is working, you can try resetting the thermostat to see if that fixes the problem. Depending on the make and model of your thermostat, there may be a reset button or you may need to follow a specific sequence of button presses to reset it. Consult the owner's manual for instructions on how to reset the thermostat.


Step 4: Check the compressor
If the air conditioner still does not turn on after resetting the thermostat, the next thing you should check is the compressor. The compressor is responsible for pumping refrigerant through the air conditioner, and if it is not functioning properly, the AC will not work. To check the compressor, you will need to locate thee access panel on the AC unit and visually inspect the compressor for any obvious signs of damage or wear. You can also try turning the compressor by hand to see if it moves freely. If the compressor appears to be damaged or is not turning freely, it may need to be replaced.


Step 5: Bring in a professional
If you are unable to diagnose and fix the problem yourself, you may need to bring your RV to a professional mechanic or RV repair shop for assistance. They will be able to diagnose the problem and make any necessary repairs to get your air conditioner working again.


Checklist for troubleshooting an RV air conditioner:

• Check the circuit breaker
• Check the power source
• Reset the thermostat
• Check the compressor for damage or wear
• Bring in a professional if necessary

RV water heaters are an essential component of any recreational vehicle, providing hot water for showers, dishes, and general use. However, like any mechanical device, water heaters can sometimes stop working or malfunction. If your RV's water heater has stopped working, there are a few steps you can take to try andd diagnose and fix the problem.


Step 1: Check the circuit breakers
The first thing you should do when your RV's water heater stops working is to check the circuit breaker. The water heater is typically connected to a dedicated circuit breaker, which can trip if there is an overload or short circuit. If the circuit breaker has tripped, simply reset it and see if the water heater starts working again. If the circuit breaker continues to trip, there may be an issue with the water heater itself that needss to be addressed.


Step 2: Check the propane
If the circuit breaker is not the issue, the next thing you should check is the propane supply. The water heater in an RV typically runs on propane gas, so if the tanks are empty or the gas lines are not connected properly, the water heater will not work. Make sure that the propane tanks are full and that the gass lines are securely connected to the water heater. If the propane tanks are full and the gas lines are properly connected, but the water heater still does not work, there may be a problem with the heating element or thermostat.


Step 3: Test the heating element
To test the heating element, you will need a multimeter. With the water heater turned off, set the multimeter to the ohms setting and touch the leads to the heating element terminals. The reading should be within the range specified in the owner's manual. If the reading is not within this range, it could mean that the heating element is faulty and will need to be replaced.


Step 4: Test the thermostat
The thermostat controls the temperature of the water in the tank, sooo if it is not functioning properly, the water heater will not work properly. To test the thermostat, you will need to locate the access panel on the water heater and locate the thermostat. With the water heater turned off, set the multimeter to the ohms setting and touch the leads to the thermostat terminals. The reading should be within the range specified in the owner's manual. If the reading is not within this range, it could mean that the thermostat is faulty and will need to be replaced.


Step 5: Bring in a professional
If you are unable to diagnose and fix the problem yourself, you may need to bring your RV to a professional mechanic or RV repair shop for assistance. They will be able to diagnose the problem and make any necessary repairs to get your water heater working again.


Checklist for troubleshooting an RV water heater::

• Check the circuit breaker
• Check the propane tanks and gas lines
• Test the heating element with a multimeter
• Test the thermostat with a multimeter
• Bring in a professional if necessary​